Multi-stranded enameled wire: enameled wire peeling method

On the enameled wire thicker, available knife or broken saw blade will be scraped off the varnish one by one. Do not scrape only when scraping the two sides, along the round around the careful smooth scraping, do not scratch the wire. This method is called scraping paint removal method.

On the finer enameled wire, with scraping paint method will scrape the wire, available fire paint method, the operation of the rotor assembly up, the head of the line outward straight, compared to the length of a good clamp with pliers to hold the wire does not need to peel the part, and then use an alcohol lamp (also available candle) to burn the wire, burn the varnish, cooled with a fine gauze lightly wiped. This method in addition to the lacquer skin high efficiency, but the operation is not grasped easily burned, burned wire.

On the temperature level of 130 (B), 155 (F), 180 (H) of the enameled copper wire, available enameled wire special paint stripper for peeling. This method is fast, non-corrosive to the copper wire, small smell.   Stranded wire Our company is a manufacturer specializing in the production and sales of enameled wire, the main products are enameled stranded wire, high temperature resistant enameled wire, aluminum enameled wire and micro fine enameled wire, mylar wire, uew enameled wire, flat enameled wire, PEW enameled wire, etc., years of professional experience, service on dozens of well-known customers, welcome to consult!